Technical Data for SY240-4
|
Calibration table
|
|
Length of the calibration table (mm)
|
15000 |
Width of slotted groove (mm)
|
320 |
Amount of vacuum nozzle
|
32 |
Amount of water nozzle
|
40 |
Connection pattern
|
Quick Disconnect Nozzles |
Adjusting height of the table (mm)
|
±60 |
Transverse adjustment of the table (mm)
|
±20 |
Longitudinal adjustment of the table (mm)
|
600 |
Vacuum pump style
|
water circulation |
Amount of vacuum pump (set)
|
8 |
Power of vacuum pump motor (kW)
|
5.5kW×8 |
Working pattern of vacuum pump motor
|
Direct connection |
Max. Vacuum degree (MPa)
|
-0.09 |
Max. air exhaust (m3/h)
|
8×180 |
Water pump power (kW)
|
1.1 |
Water groove material
|
Stainless |
Guide way
|
Aluminum alloy |
Vertical adjusting pattern of table
|
Manual |
Longitudinal adjusting pattern of table
|
Electric |
Transverse adjustment pattern of table
|
Manual |
Installation pattern of tooling
|
Slotted groove |
|
Haul-off cutting saw |
|
Haul-off speed (m/min)
|
0.5-7 |
Motor Power (kW)
|
2.2kW×2 |
Haul-off force (kN)
|
32 |
Amount of haul-off motor (set)
|
2 |
Length of pedrail (mm)
|
2150 |
Motor Speed Control
|
Frequency converter |
Connection pattern between pad and caterpillar
|
Quick change |
Width of pad (mm)
|
240 |
Open pattern of the upper caterpillar
|
Parallel |
Adjustment of center height (mm)
|
±50 |
Pneumatic pressure (MPa)
|
0.6－0.8 |
Air consumption (m3/h)
|
2 |
Max. cutting width of profile (mm)
|
240 |
Max. cutting height of profile (mm)
|
138 |
Dust collection pattern
|
Suction |
|
Dump table |
|
Tipping pattern
|
Pneumatic |
Length measuring pattern
|
Stroke switch |
Centerline height (mm)
|
1000 |
Adjustment of centerline height (mm)
|
±50 |
Standard length (mm)
|
6000 |
|
Statement |
|
Electrical motor specs
|
575 V / 3Phase / 60 Hz |
Control voltage
|
24 V DC |
Electrical components
|
with CE or UL mark |
|
Company